Safety Information; Know Your Unit - Troy-Bilt TB57HB Manual Del Operador

SAFETY INFORMATION

• Never use the cord to carry the charger. Never remove the plug from the power outlet by pulling it
by the cord. Keep the cord away from heat, oil, sharp edges or moving parts. Replace damaged
cords immediately. Do not use the charger if the cord is damaged.
• The use of any attachment that is not recommended or sold by the manufacturer of the battery
charger may result in a risk of fi re, electric shock, or personal injury.
• Immediately discontinue use of the battery if the battery emits an unusual smell, feels hot,
changes color, changes shape, or appears abnormal in any other way.
• This battery charger is double insulated and has a two-prong polarized plug (one blade is wider
than the other). This plug will fi t a polarized outlet only one way. If the plug does not fi t fully into
the power outlet, reverse the plug. If it still does not fi t, contact a qualifi ed electrician to install the
proper outlet. DO NOT change the plug in any way. IN ALL cases, make sure the power outlet is
properly grounded. If you are not sure, have a certifi ed electrician check the power outlet.
• The battery pack cells may develop a small leak under extreme usage or temperature conditions.
If the outer seal is broken and the leakage gets on your skin:
1. Use soap and water to wash immediately
2. Neutralize with lemon juice, vinegar, or other mild acid
WARNING:
If the battery fl uid gets in your eyes, fl ush immediately with
clean water for at least 15 minutes. Get immediate medical attention.
MAINTENANCE AND STORAGE SAFETY
• DO NOT perform maintenance procedures other than those described in this manual. Do not
attempt to repair; there are no user serviceable parts inside.
• Follow all maintenance instructions in this manual.
• Before inspecting, servicing, cleaning, storing, transporting or replacing any parts on the unit:
1. Make sure all moving parts have stopped.
2. Allow the unit to cool.
3. Make sure the switch is in the OFF position.
4. Remove the battery.
• Never remove, modify or make inoperative any safety device furnished with the unit.
• Frequently inspect the unit for damage. Before further use, any damaged part should be carefully
checked to determine that it will operate properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts, breakage of parts and any other conditions
that may affect its operation. Damaged parts should be properly repaired or replaced.
• Use only original manufacturer replacement parts and accessories, which are designed
specifi cally to enhance the performance and maximize the safe operation of the product. Failure
to do so may cause poor performance and possible injury.
• Remove the battery from the unit when not in use.
• Be sure to secure the unit while transporting.
• When not in use, store the unit in a locked-up and dry, or high and dry, place to prevent
unauthorized use or damage. Keep out of the reach of children.
• Keep the handle dry, clean and free from debris, oil and grease. Clean the unit after each use. Never
douse or squirt the unit with water or any other liquid. Do not use solvents or strong detergents.
• If dropped in water, do not use the unit.
• SAFETY AND INTERNATIONAL SYMBOLS •
This operator's manual describes safety and international symbols and pictographs that may appear
on this product. Read the operator's manual for complete safety, assembly, operating, maintenance
and repair information.
S M
YMBOL EANING
• SAFETY ALERT SYMBOL
Indicates danger, warning or caution. May be used in conjunction with other symbols
or pictographs.
• READ OPERATOR'S MANUAL
WARNING:
instructions. Failure to do so can result in serious injury to the operator and/or bystanders.
• WEAR EYE AND HEARING PROTECTION
WARNING:
injury and hearing loss. Wear eye protection meeting ANSI Z87.1-1989 standards and
ear protection when operating this unit. Use a full face shield when needed.
• KEEP BYSTANDERS AWAY
WARNING:
50 feet (15 m) from the operating area. If anyone enters the work area, stop the unit!
• THROWN OBJECTS CAN CAUSE SEVERE INJURY
WARNING:
by the blower. Never point the blower at anyone.
• WEAR SAFETY GLOVES
Wear non-slip, heavy-duty protective gloves when handling the unit.
• WEAR SAFETY FOOTWEAR
Wear non-slip safety footwear when using this equipment.
• DO NOT USE IN THE RAIN
WARNING:
in the rain, or in damp or wet conditions. Moisture is a shock hazard.
SAVE THESE INSTRUCTIONS
2
Read the operator's manual(s) and follow all warnings and safety
Thrown objects and loud noise can cause severe eye
Keep all bystanders, especially children and pets, at least
Keep clear of the blower outlet. Objects can be thrown
Avoid dangerous environments. Never operate your unit

KNOW YOUR UNIT

APPLICATIONS
This unit may be used for the purposes listed below:
• Cleaning yards, garages, driveways, porches,
patios, sidewalks, around walls, fences, etc.
No Tools Required!
Battery
Nozzle
Battery Charger
ASSEMBLY INSTRUCTIONS
This unit requires assembly.
UNPACKING
• Carefully remove the product and any accessories from the box.
• Inspect the product carefully to make sure no breakage or damage occurred during shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily operated
the product.
• If any parts are damaged or missing, please call 1-800-828-5500 (U.S.) or 1-800-668-1238
(Canada) for assistance.
INSTALLING THE BLOWER TUBE AND NOZZLE
WARNING:
Make sure the battery is removed from the unit and the two-speed
switch is in the OFF position before installing the blower tube and nozzle.
This blower can be operated with or without the blower
tube and nozzle. The blower tube and nozzle extend
the reach of the blower and concentrate the fl ow of air
it delivers.
1. Align the widest end of the blower tube with the
front opening on the blower (Fig. 1).
2. Slide the blower tube over the front opening on the
blower until the latch is inserted into the opening on
the blower tube and locks into place.
3. Slide the nozzle over the blower tube until the latch
on the blower tube is inserted into the end of the
opening on the nozzle and locks into place.
CHARGING THE BATTERY
• Charge the battery in a cool, dry place.
• For optimal performance, charge the battery every
two weeks, even when not in use.
• The battery does not have to be fully discharged before
recharging. This battery will not develop a memory.
NOTE: The battery is not shipped fully charged. It is
recommended to fully charge the battery before use
to ensure that maximum run time can be achieved.
A fully discharged battery will require approximately
4.5 hours to completely charge. 2 to 3 initial
charging/discharging cycles may be required in
order to reach the maximum run time/capacity.
NOTE: Do not recharge a fully charged battery pack.
Overcharging shortens the battery life.
1. Plug the charger into an AC wall outlet / receptacle.
2. The red Power LED will illuminate (Fig. 2).
3. Insert the battery into the charger (Fig. 3).
NOTE: Make sure the battery is fully inserted into
the charge by making sure the red Indicator LED
charge light is on (Fig. 2).
4. Once the battery has reached a full charge level the
Indicator LED will turn from red to green (Fig. 2).
5. The battery may be removed (Fig. 3) or stored in
the charger once it is fully charged; however, it is
recommended to disconnect the plug from the wall
outlet/receptacle.
NOTE: Lithium-ion batteries, while in use, will
continue to provide full power without power fade
unlike typical batteries; when the battery is fully
discharged, the battery circuitry will immediately cut
power to the tool and require immediate charging.
NOTE: If the battery does not charge properly, check
the current at the power outlet with another tool.
Make sure that the outlet is not turned off.
BATTERY INSTRUCTIONS
Press the battery capacity indicator (BCI) button. The
lights will illuminate according to the battery's current
power level (Fig. 4).
INSTALLING AND REMOVING THE BATTERY
Follow these instructions in order to avoid injury and to
reduce the risk of electric shock or fi re:
• Verify that the switch is in the OFF position before
installing or removing the battery. Refer to Starting
and Stopping Instructions.
• Verify that the battery is removed and the switch is in the OFF position before inspecting,
adjusting or performing maintenance on any part of the unit.
Installing the Battery
1. Align the tongue of the battery with the handle cavity (Fig. 5).
2. Grasp the handle fi rmly.
3. Push the battery into the handle cavity until the latch locks into place.
4. Do not use force when inserting the battery. It should slide into position and "click."
Two-speed Switch
Blower Tube
Blower
Blower Tube
Nozzle
Fig. 1
Battery
Compartment
Indicator LED
Power LED
Fig. 2
Fig. 3
BCI Button
Lights Capacity
4 Green Lights The battery is at full capacity
The battery is at 70% capacity
3 Green Lights
2 Green Lights The battery is at 45% capacity
The battery is at 10% capacity and
1 Green Light
requires charging soon
The battery is under 10% capacity
Lights go out
and requires immediate charging
Fig. 4
Tongue
Handle Cavity
Fig. 5
Blower
Power
Cord
Wrap
LED Meter
Latch Button