Publicidad
ISO DIN HEAD UNIT PROVISION
1
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit. (Fig. A)
2
Snap the pocket into the bottom
opening of the radio housing. (Fig. B)
3
Slide the head unit into the radio
opening until the side clips engage.
(Fig. C)
4
Snap the Trim plate into the Radio
Housing. (Fig. C)
5
Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper
mating adapters from Metra and/or
AXXESS.
6
Reassemble dash in reverse order
of disassembly.
99-7517S KIT ASSEMBLY
A
B
C
4
Publicidad
