Product Disposal; Ec Declaration Of Conformity; Technical Specifications - Nice TTGO TG ME Instrucciones Y Advertencias Para La Instalación Y El Uso

• The system operates in the emergency condition with an operator
present:
– Check to see if the motor has undergone a significant thermal or mechanical shock.
– Make sure each part of the motor is still in good condition.
– Run the deletion procedure (paragraph 5.12) and adjust the limit switches again.
9

PRODUCT DISPOSAL

This product is an integral part of the automation and therefore must
be disposed together with the latter.
As in installation, also at the end of product lifetime, the disassembly and scrapping op-
erations must be performed by qualified personnel.
This product comprises various types of materials: some m ay be recycled others must be
disposed of. Seek information on the recycling and disposal systems envisaged by the
local regulations in your area for this product category.
Caution! – some parts of the product may contain pollutant or hazardous substances
which, if disposed of into the environment, may cause serious damage to the environ-
ment or physical health.
As indicated by the symbol alongside, disposal of this product in domestic
waste is strictly prohibited. Separate the waste into categories for disposal,
according to the me thods envisaged by current legislation in your area, or
return the product to the retailer when purchasing a new version.
Caution! – Local legislation may envisage serious fines in the event of
abusive disposal of this product.
10

TECHNICAL SPECIFICATIONS

l Power supply voltage: See the technical data on model's label. l Encoder
resolution: 2.7°. l Continuous operation: 4 minutes. l Protection rating:
IP 44 (tubular motor). l Operating temperature: -20°C (minimo).
Notes:
- All technical specifications stated in this section refer to an ambient temperature of
20°C (± 5°C).
- The productor reserves the right to apply modifications to the product at any time when
deemed necessary, maintaining the same intended use and functionality.
11

EC DECLARATION OF CONFORMITY

Number declaration: 501/TTGO ME
Nice S.p.A. hereby declares that the product: TTGO ME comply with the essential
requirements and other relevant provisions as established by the directives 1999/5/CE
(applicable only to products with on-board receiver). The CE declaration of conformity
can be consulted and printed out at the web site www.nice-ser vice.com or may be
requested from Nice S.p.A.
21 April 2016
Eng. Roberto Griffa
(Chief Executive Officer)
English – 10