Product Disposal - Nice To-Max A Instrucciones Y Advertencias Para La Instalación Y El Uso

6.2 - "Obstacle detection" function
In general the tubular motors in the "Max" range, though
guaranteeing a maximum continuous use interval of 4
minutes, are designed for residential use and therefore
intended for a discontinuous use. Therefore, in the event
of overheating (for example due to continuous and pro-
longed activation) a thermal cut-out protection trips to
shut off power supply and restore operating conditions
only when the temperature returns to normal values.
6.3 - "Auto-update of limit positions" function
CAUTION! – This function is enabled only if the limit
switch has been programmed in "Automatic mode" or
"Semi-automatic mode".
During daily use of the automation, the shutter can be
heard on impact with the limit switch at the end of a
manoeuvre. In these cases, impact is due to the "Auto-
update of limit positions" function that repeats meas-
urement of the parameters of the two limit positions and
updates the previously memorised values.
The aim of this function is to compensate over time for
extensions or shrinkage of the structure due to wear and
temperature variations, thus enabling the Up and Down
movements to be completed with constant precision at
the respective limit positions.
6 – English
What to do if...
(troubleshooting guide)
❑ The system sensitivity to obstacle detection is
reduced:
– Clean the guides of the shutter to remove any im -
perfections and improve shutter movement.
– Eliminate any mechanical blockages.
– Secure the motor and shutter to reduce possible
oscillations and system vibrations.
❑ The system operates in emergency "hold-to-run"
conditions:
– Check that the motor is not subject to a significant
electric or mechanical shock.
– Check that all motor parts are intact.
– Repeat the installation procedure.
❑ The system sensitivity to obstacle detection is too
high:
– Continue to press the same pushbutton to com-
plete the manoeuvre.
– Perform two complete opening and closing cycles.

Product disposal

As for the installation, the disposal operations at the end
of the product's effective life must be performed by quali-
fied personnel.
This product is made up of different types of material,
some of which can be recycled while others must be
scrapped. Seek information on the recycling and dispos-
al methods envisaged by the local regulations in your
area for this product category.
Warning! – Some parts of the product may contain pol-
luting or hazardous substances that, if incorrectly dis-
posed of, could have a damaging effect on the environ-
ment or on the health of individuals.
As the symbol on the left indicates, this
product may not be disposed of with the
usual household waste.
It must be disposed of separately in compli-
ance with the regulations locally in force, or
returned to the seller when purchasing a new, equivalent
product.
Warning! – Heavy fines may be imposed by local laws for
the illegal disposal of this product