Troubleshooting Guide - BH FITNESS H698 Manual De Instrucciones

Ocultar thumbs Ver también para H698:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
If both hands are not placed correctly
as shown in figure nº 6 then the pulse
function will not work.
If a «P» appears on the screen or the
heart symbol does not flash, make
sure that both hands are placed
correctly on the sensors.
RECOVERY TEST:
FITNESS.-
This electronic device is equipped with a
recovery test function. This offers you
the advantage of being able to measure
how long it takes your heart rate to
recover
after
exercise. Upon finishing the exercise
leave your hands on the pulse gauges
and press the "Recovery Test" button,
this will start a one minute countdown.
Only the Time and Pulse rate function
read-outs will remain displayed. The
electronic device will measure your
pulse rate during this minute. The heart
rate recovery time will be displayed on
the Heart rate line.
If, at any time during this minute, you
decide to abandon this test then press
the "Recovery Test" button and this will
take you back to the main screen.
When the minute is up, the electronic
device will work out the difference and
your fitness rating will be displayed up
on the screen: F1, F2,..., F5, F16; where
F1 is the best (fitness "Excellent") and
F6 the worst (fitness "Very Poor").
The comparison between the worked
heart rate and the recovery heart rate
provides a fast, simple method of
gauging how fit you are. Your fitness
rating is a guideline that shows you
how fast your heart recovers after
physical exertion. If you exercise
regularly then you will see your fitness
rating improve.
having
finished
The test will not work if the sensor is
not positioned correctly or if the letter
"P" is shown on the screen.

TROUBLESHOOTING GUIDE

Problem: The display comes on but
only the Time function Works.
the
Solution:
a.-Make sure that the connection
cable is connected.
Problem: The monitor does not
switch on.
Solution:
a.-
Check
connections.
b.-Check the cable connections for
the main post.
Avoid leaving the electronic monitor
in direct sunlight as
damage the liquid crystal display.
Similarly, do not expose it to water or
knocks.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE.
Do not hesitate to get touch with us if
you have any queries, by calling:
+44 0844 335 3988
service@bh-uk.co.uk
13
the
monitor
this might
cable

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido