Honda WH15XT Manual De Explicaciones página 55

TECHNICAL INFORMATION
Dimensions and weight
Model
Description code
Type
Length
Width
Height
Dry mass [weight]
Engine design and performance
Model
Engine type
Displacement
[bore×stroke]
Engine Net power
(in accordance with SAE J1349*)
Engine Max. Net torque
(in accordance with SAE J1349*)
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
*The power rating of the engine indicated in this document is the net
power output tested on a production engine for the engine model and
measured in accordance with SAE J1349 at 3,600 rpm (Engine Net
Power) and at 2,500 rpm (Engine Max. Net Torque). Mass production
engines may vary from this value.
Actual power output for the engine installed in the final machine will
vary depending on numerous factors, including the operating speed of
the engine in application, environmental conditions, maintenance, and
other variables.
Pump
Suction port diameter
Discharge port diameter
Total head (maximum)
Suction head (maximum)
Discharge capacity (maximum)
Self-priming time
52
WH20XT
WAKT
DX and EX types
425 mm (16.7 in)
375 mm (14.8 in)
415 mm (16.3 in)
24 kg (53 lbs)
GX160T
4-stroke, overhead valve, single cylinder
3
163 cm (9.9 cu-in)
[68.0×45.0 mm (2.68×1.77 in)]
3.6 kW (4.9 PS)/3,600 rpm
10.3 N·m (1.05 kgf·m, 7.6 lbf·ft)/
2,500 rpm
0.58 L (0.61 US qt, 0.51 Imp qt)
3.1 L (0.82 US gal, 0.68 Imp gal)
Forced air
Transistor magneto
Counterclockwise
50 mm (2.0 in)
50 mm (2.0 in)
45 m (148 ft)
8 m (26 ft)
450 L (119 US gal, 99 Imp gal)/min
80 seconds at 5 m (16.4 ft)
DFX and EFX types
520 mm (20.5 in)
400 mm (15.7 in)
460 mm (18.1 in)
27 kg (60 lbs)