Tabla de contenido
Publicidad
INSTRUCCIONES GENERALES DE PUESTA EN FUNCIONAMIENTO
HOSPIVAC CABINE con PROCOM 2 o CYCLIC 2020
The vacuum units with PROCOM2 or CYCLIC 2020
RF's equipment.
Recommended separation distances between portable and mobile RF communications equipment and the vacuum
The vacuum units with PROCOM2 or CYCLIC 2020 automate is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of the vacuum units with PROCOM2 or CYCLIC 2020
automate can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the vacuum units with PROCOM2 or CYCLIC 2020 automate as recommended
below, according to the maximum output power of the communications equipment
Rated maximum
output
power of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can
be determined using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of
the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
Manual n° 517391 versión 5
automate can be affected by communication portables or mobiles
units with PROCOM2 or CYCLIC 2020 AUTOMATE
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d = 1.16 √P
0.12
0.37
1.16
3.69
11.6
Las especificaciones están sujetas a cambios sin previo aviso
m
80 MHz to 800 MHz
d = 1.16 √P
0.12
0.37
1.16
3.69
11.6
800 MHz to 2,5 GHz
d = 2.33 √P
0.23
0.74
2.33
7.37
23.3
06/2015
Pàgina 18/18
Publicidad
Tabla de contenido
