2-1.4 Assembling The Standard Stabilisers - TUBESCA-COMABI NEOLIUM SX Instrucciones De Montaje Y De Uso

2-1.4 Assembling the standard stabilisers

1. Position the 4 stabilisers above rung no. 1 and below rung no. 6.
2. Fasten the clamps in place following the diagrams below.
3. Check the stabiliser spacing.
1
2
Check "stabiliser length" and "stabiliser width" according to table §2-3.2
102-02920515 - ind.C - 11/2021
3
- Loosening
+ Tightening
48