2-3.1 Assembling The Stabiliser Extensions On To The Standard Stabilisers - TUBESCA-COMABI NEOLIUM SX Instrucciones De Montaje Y De Uso

2-3.1 Assembling the stabiliser extensions on to the standard stabilisers

1. Remove the stabiliser foot.
2. Insert the stabiliser extension into the stabiliser base, and then pin everything together with a
Ø10 tube-clip pin.
3. Reassemble the stabiliser foot at the end of the stabiliser extension, and then pin together with
a Ø10 tube-clip pin.
4. Adjust the position of the stabiliser arms according to the diagram below, and then lock the
stabiliser clamp on to the extension arm.
1
2
3
102-02920515 - ind.C - 11/2021
4
Ensure that the
split pin is locked in place
0.16m
55