Philips SRO 2550 Manual De Instrucciones página 29

SRO 2550 ROT 350
If operational defects or other departures from normal operational behavior occur, you
must switch OFF the X-ray unit and inform your respective service organization. You may
only resume operation of the X-ray equipment when it has been repaired. Operation using
faulty components may lead to an increased safety risk or unnecessarily high exposure to
radiation.
WARNING Faulty components which affect the safety of the X-ray equipment must be
replaced by genuine spare parts.
Recording Service and repairs must be entered in the medical products logbook, including the follow-
ing data:
results
– Type and scope of work.
– Details of any changes to ratings or the working zone.
– Date, company and person performing the work, signature.
Cleaning Detergents with a high alcohol content make the material dull or cause it to crack.
Caution!
Switch OFF the mains voltage of the X-ray equipment before cleaning.
Never use any caustic, solvent or abrasive detergents or polishes.
Heed during cleaning:
– Be careful that no water or other fluids can get inside the X-ray equipment.
This prevents short circuits in the electrical installations and corrosion on the compo-
nents.
– Clean enamelled parts and aluminium surfaces only with a moist cloth and a mild deter-
gent and wipe with a dry woollen cloth.
– Wipe chrome parts only with a dry woollen cloth.
SRO 2550 ROT 350
SRO_2550_ROT_350_Manual_English.fm
(05.0)

2004 Philips Medical Systems
ALL RIGHTS RESERVED
23