Publicidad
Idiomas disponibles
Idiomas disponibles
15. Pull out on the fascia (1) at the wheel house
opening to disengage the fascia (1) from the
fender retaining bracket. Repeat on the opposite
side.
Caution: Take the proper precautions to protect the face of the front fascia from cosmetic damage.
16. Remove the four fascia to radiator support
fasteners (1).
17. With the help of an assistant, remove the fascia (2)
from the vehicle and place it on a clean
workbench.
Note: Care should be take to position the nameplate
(2) in the same location during reassembly.
18. If equipped, carefully release the tabs that secure
nameplate (1) to the production grille (textrure),
remove the nameplate (1) for installation to the kit
suplied grille (texture).
19. If equipped, detach the adaptive cruise control
harness from the lower inner fascia support.
20. Remove the three fasteners (2) attaching the lower
inner fascia support (3) to the fascia, and remove
the support (3).
5/25/2011
Page 5 of 30
K6860996
Publicidad
