Publicidad
Idiomas disponibles
Idiomas disponibles
35. If equipped, connect the adaptive speed control
harness connector near the RH fog lamp.
36. If equipped, connect the harness (2) to the fog
lamps (1) on both sides.
37. Position the front belly pan to the underside of the vehicle.
38. Install the four push pin fasteners (3) that secure the front belly pan to the underside of the vehicle's
lower cross-member.
39. Install the six screws (1) that secure the front belly pan to the underside of the vehicle's front fascia.
Tighten the fasteners securely.
40. Install the six screws (2) that secure the front belly pan to the underside of the vehicle's front wheel house
splash shield. Tighten the fasteners securely.
5/25/2011
Page 8 of 30
K6860996
Publicidad
