Publicidad
Idiomas disponibles
Idiomas disponibles
9. Remove fascia – Using plastic trim removal tool, remove the fascia starting at the outer edges near wheel wells while gently pulling off the fascia. While removing
the fascia, carefully remove the connection of electrical plug on passenger side of the vehicle.
10. Remove metal panel – Using 10 mm socket, remove (1) bolt and (1) nut from metal panel above bumper beam, both sides.
©2020 Horizon Global Americas Inc. - Printed in Mexico
Sheet 7 of 27
76339NP
08-05-20
Rev. A
Publicidad
