Horizon Global 76339 Instrucciones De Instalación página 8

11. Remove bumper beam – Using 21 mm socket, remove (4) factory bolts from bumper beam on both sides and keep for reinstallation. Remove the bumper beam
and return to owner.
12. Apply sealant - Apply silicone sealant to both hitch side bracket mounting
surfaces, see Figure 2.
Not
included
©2020 Horizon Global Americas Inc. - Printed in Mexico
Figure 2
13. Install Hitch - Raise the hitch into position and align holes with the end
panel. Loosely install (8) existing M14 factory bolts to the hitch, see Figure 1.
Sheet 8 of 27 76339NP 08-05-20 Rev. A