1. Lower spare tire- open the rear hatch to gain access to the spare tire
winch. Using a M20 socket, lower the spare tire and set aside for later.
3. Trim fascia - Using a tape measure, marker, and utility knife, measure,
mark, and trim the lower fascia as shown in Figure 2.
1/2"
Bottom view of lower fascia
©2020, 2021 Horizon Global™ Corp - Printed in Mexico
L C
of Vehicle
5-1/2"
Figure 2
2. Remove exterior trim panel – This is located on the driver side of the
car. Remove 3 push rivets by using a flat head screwdriver. Pull carefully
on the trim panel to remove and set aside for later.
4. Lower vehicle exhaust - remove the rear and side hangers. Support the
exhaust to prevent damage. Spraying a lubricant or soapy water on the
metal hanger rod and the rubber isolator helps removal.
Sheet 4 of 15
76420NP
6-8-21
Rev. C