Battery Type; Intended Use - DeWalt DCS520 Traducido De Las Instrucciones Originales

Battery Type

The DCS520 operates on a 54 volt battery pack.
The DCB546 battery pack may be used. Refer to Technical Data
for more information.
Package Contents
The package contains:
1 Plunge saw
1 Hex wrench
1 Li-Ion battery pack (T1 models)
2 Li-Ion battery packs (T2 models)
3 Li-Ion battery packs (T3 models)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Maximum depth of cut
Blade diameter
Date Code Position (Fig. A)
The date code 16 , which also includes the year of manufacture,
is printed into the housing.
Example:
2016 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Plunge trigger
1
On/off switch
2
Main handle
3
Shoe
4
Rail adjustment knobs
5
Bevel scale
6
Bevel adjustment knobs
7
Depth adjustment knobs
8
Depth scale
9
Blade
10
Front handle
11
Spindle lock button
12
Spindle lock lever
13
Battery pack
14
Battery release button
15
Date code
16
Dust extraction outlet
17
Anti-kickback knob
18
Speed wheel
19
Fuel gauge
20

Intended Use

The DCS520 cordless plunge saw is designed for professional
sawing of wood products.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This heavy-duty plunge saw is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.

WARNING: Use only D
e
Inserting and Removing the Battery Pack
from the Tool (Fig. A)
nOTE: Make sure your battery pack
To Install the Battery Pack into the Tool
1. Align the battery pack 14
Figure A.
2. Slide it in until the battery pack is firmly seated in the tool
and ensure that you hear it snap into place.
To Remove the Battery Pack from the Tool
1. Press the release button 15
pack out.
2. Insert battery pack into the charger as described in the
charger section of this manual.
EnGLIsh
WALT battery packs and chargers.
14 is fully charged.
with the rails as shown in
and firmly pull the battery
37