Publicidad
Idiomas disponibles
Idiomas disponibles
18 English
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cut-
ting edges are less likely to bind and are easier to
EN
control.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
Careful handling and use of cordless
devices
Recharge only using the charger recommend-
ed by the manufacturer.
A charger that is suitable for one type of battery
pack may result in risk of fire when used with an-
other battery pack.
Use power tools only with specifically desig-
nated battery packs.
Use of any other battery packs may create risk of
injury and fire.
When battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws or other small metal
objects that can cause a bridging of contacts.
Short-circuit between the battery terminals may
cause burns or a fire.
On inappropriate use, liquid may
be leak from the battery; avoid
contact. If contact occurs acciden-
tally, flush with water. If liquid
comes into contact with the eyes,
seek medical help.
Liquid leaking from the battery may
cause irritation or burns.
Service
Have your power tool serviced by
a qualified repair person using
only original spare parts.
This will ensure that the safety of the
power tool is maintained.
Machine-specific Safety Warnings
Wear hearing protection.
The effects of noise can cause loss
of hearing capacity.
Akkuschrauber-EN / 1006
Wear safety gloves.
Hold the machine with a firm grip.
High reaction torque can briefly occur while driv-
ing in and loosening screws.
Always assume a safe standing position and
hold the power tool securely in both hands.
When the drill unexpectedly jams, the machine
kicks back.
Use
appropriate
determine if utility lines are hidden
in the work area or call the local
utility company for assistance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes dam-
age to property or electric shock.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cut-
ting accessory or fastener may contact hidden
wiring.
Cutting accessory and fasteners contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
Secure the workpiece.
A workpiece clamped with clamping
devices or in a vice is held more
secure than by hand.
Do not work on stone containing
crystalline silica (SiO2).
SiO
2
This will produce dust which is dan-
gerous to your health.
Do not work on materials containing
asbestos.
Asbestos is considered carcinogenic!
Take protective measures if there is danger of
formation of combustible or explosive dust
during operation that can be hazardous to
health.
Example: Some dusts can be carcinogenic. Wear
a dust mask and work with a dust/chip extraction
unit, if possible to connect.
Always wait until the machine has come to a
complete stop before placing it down.
The tool insert can jam and lead to loss of control
over the power tool.
Safety rules
detectors
to
Publicidad
