Publicidad
Idiomas disponibles
Idiomas disponibles
Safety rules
Tools not in use must be locked
away safely in a dry place out of
the reach of children.
Switch the power tool off immedi-
ately
if
jammed. Be prepared for high
torque levels if the tool kicks back.
The tool insert jams if:
the power tool becomes overloaded or
the tool tilts in the workpiece
Residual risk. Although this information sheet
and the operating manuals for our electrical
tools contain extensive instructions on safe
working with electrical tools, every electrical
tool involves certain residual risks that cannot
be completely prevented through safety mech-
anisms. Therefore, electrical tools must always
be operated with the necessary caution.
Battery safety instructions
Do not use faulty or deformed batteries.
There is a risk of explosion.
Do not open the battery.
Danger of shortcircuiting.
Never short-circuit the battery.
There is a risk of explosion.
Protect the battery against heat or
temperatures over 50°C , e. g., also
against continuous sun irradiation
and fire.
There is a risk of explosion.
In case of damage and improper use of the bat-
tery, vapours may be emitted. Provide for fresh
air and seek medical help in case of complaints.
The vapours can irritate the respiratory system.
When the battery is defective, liquid can escape
and come into contact with adjacent compo-
nents. Check any parts concerned.
Clean such parts or replace them, if required.
Cover the battery terminals when storing out-
side the charger.
There is danger of fire and explosion through short
circuits caused by metal objects.
the
tool
insert
Charger safety instructions
Never use the electric device with
a damaged cable. Do not touch the
damaged cable and pull the mains
plug when the cable gets damaged
gets
during operation.
Damaged cables increase the risk of
electric shock.
Do not operate the unit on easily inflammable
surfaces (e. g. paper, textiles, etc.) or in inflam-
mable environments.
Fire hazard due to occurring heat build-up.
Protect the electrical device from
rain and moisture.
The penetration of water in a battery
charger increases the risk of electric
shock.
Do not cover the ventilation slots during the
charging process.
They preserve the battery and the battery charger
from overheating.
Do not charge the batteries of other manufac-
turers.
The device is only suitable for the charging of
Powers batteries. There is otherwise a risk of fire
and explosion.
Keep the battery charger clean.
Contamination may result in danger of electric
shock.
Check the electrical device, cable and plug
each time before using. Do not use the electri-
cal device when defects are detected. Do not
open the electrical device yourself and have it
repaired only by qualified personnel using
original spare parts.
Damaged electrical devices, cables and plugs
increase the risk of electric shock.
-WARNING-
Do not open the charger! Caution high voltage!
There is a risk of electric shock.
Ensure that the connection between the charger
and the battery is correctly positioned and is
not impeded by foreign bodies.
There is a risk of fire and explosion through short
circuits caused by metal objects.
Ensure that the battery charging compartment
does not have any foreign objects and protect
English 19
EN
Akkuschrauber-EN / 1006
Publicidad
