Device Description; Specified Conditions Of Use; Requirements For The User; Technical Data - Powers P180 Manual De Instrucciones

20 English
from dirt and humidity. The storage location
must be dry and frost-free.
There is a risk of fire and explosion in the case of
EN
a short-circuit.
A charger which is connected to the mains
must always be attended.
There is a risk of fire.

3. Device description

Read all the warnings and instruc-
tions before using the equipment.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
For a clearer understanding, please consult
the enclosed illustrations showing the device.
Have these illustrations to hand and open
while reading the operating instructions.
Operating elements
I Quick-action chuck
II Clamping sleeve
III Torque selection collet
IV Gear selector switch (Option)
V Rotational direction switch
VI On/Off control switch
VII Unlocking ring / retaining ring (Option)
VIII Battery release button
IX Button for charge level indicator (Option)
X Button for lighting (On/Off) (Option)
XI Bit
XII Bit extension
XIII Angle adapter (Accessories)
XIV Adjustment ring for depth stop (Option)
Device components
1 Drill spindle
2 Hexagon-shaped socket (Option)
3 Gearing cap (Option)
4 Ventilation slots
5 Battery
6 Battery charge level indicator
7 Battery contacts
Akkuschrauber-EN / 1006
8 Battery cap
9 LED lighting
10 Belt clipholder
11 Retaining pin
12 Bit holder (Option)
17 Outer square support (Option)
18 Depth stop (Option)
Battery charger
13 Battery charger
14 LED charge level indicator
15 Battery charging compartment
Contents
See packaging

Specified conditions of use

The machine is intended for driving in and loosen-
ing screws as well as for drilling (option) wood,
metal, ceramics and plastic.

Requirements for the user

The tool must only be operated, maintained and
serviced by authorised trained personnel. The
personnel must be made aware of the relevant
dangers.

Technical data

Rated voltage of battery in V DC
Capacity in Ah
1. n = No-load speed (1st gear)
0
2. n = No-load speed (2nd gear)
0
in rpm
Nm
max. torque hard joint
Nm
max. torque soft joint
Noise levels
L = A-rated sound pressure level
pA
L = A-rated sound power level
wA
K = Measurement uncertainty value
The noise level can exceed 85 dB(A)
during operation.
Wear hearing protection!
Device description