Bartscher A162808 Manual Del Usuario página 44

CAUTION!
During cleaning and preparation of the device, make sure the device is
not connected to the power supply and that the temperature adjustment
knob is in "OFF" position.
Prepare the device

Remove the lid and take out the frying basket and the heating element shield out of
the device.

Place the frying basket handle in the
intended place; in order to do this lift
it, place on the mounting hook and
insert making sure that both
elements click together.

Detach the control box from the device by lifting it carefully.

Before the first device operation clean it and its equipment according to the
instructions in section 6 "Cleaning". Protect the electric system and the
connection box from the water penetration. Then thoroughly dry the device
and all equipment elements!

Carefully place the control box in the guide on the rear side of the body. Both pivots
at the bottom of the control box must be placed in the openings of the guide for the
device to be set correctly.
Note: For safety reasons the device only operates when the control box is properly
mounted to it, so that the micro-switches enable the device to function.

Mounty the shield on the heating element.

There may be no water at the bottom of the basin before filling it with the frying oil
or block grease. The basin must be clean and dry.

The oil drain tap must be closed (lever turned left and
facing down) (see figure on the right).
- 40 -
Mounting
hook
Frying
basket
handle