Key To Symbols; Symbols On The Machine; Explanation Of Warning Levels - Husqvarna K 1270R Manual De Instrucciones

Symbols on the machine

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Wear personal protective equipment.
See instructions under the "Personal
protective equipment" heading.
WARNING! Dust forms when cutting,
this can cause injuries if inhaled. Use
an approved breathing mask. Avoid
inhaling exhaust fumes. Always
provide for good ventilation.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and
understand the instructions in the
manual before using the machine.
WARNING! Sparks from the cutting
blade can cause fire in combustible
materials such as: petrol (gas), wood,
dry grass etc.
Ensure the blades are not cracked or
damaged in any other way.
Do not use circular saw blades
Choke.
Decompression valve
Starter handle
Refuelling, petrol/oil mix
2 – English

KEY TO SYMBOLS

Starting instruction
decal See instructions
under the heading
Starting and stopping.
Type plate
Row 1: Brand, Model (X,Y)
Row 2: Serial No. with
manufacturing date (y, W, X):
Year, Week, Sequence No.
Row 3: Product No. (X)
Row 4: Manufacturer
Row 5: Manufacturer address
Row 6-7: If applicable, EC typ-approval (X, Y): Approval
code, Approval stage
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown to
meet Federal and Californian emissions requirements.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.

Explanation of warning levels

The warnings are graded in three levels.
WARNING!
CAUTION!
NOTICE!
NOTICE! Used if there is a risk of damage to materials
or the machine if the instructions in the manual are not
followed.
EMISSION CONTROL INFORMATION
0
®
HUSQVARNA AB, HUSKVARNA, MADE IN SWEDEN
THIS ENGINE MEETS U.S. EPA EXH/EVP
201 6
REGS FOR 2016 SORE. REFER TO
OPERATOR'S MANUAL FOR MAINTENANCE
SPECIFICATIONS AND ADJUSTMENTS.
EMISSIONS COMPLIANCE PERIOD: 300 HRS
WARNING! Used if there is a risk of
!
serious injury or death for the operator
or damage to the surroundings if the
instructions in the manual are not
followed.
CAUTION! Used if there is a risk of injury
!
to the operator or damage to the
surroundings if the instructions in the
manual are not followed.
XXXXXXXXX YYYY
s / n YYYY WWXXXXX
XXX XX XX-XX
Husqvarna AB
Huskvarna, SWEDEN
XXXXXXXXXXX
XXXXXXXXXXXX (YY)
74cc EM /N
B