Descargar Imprimir esta página

Technoline WS 9069 Manual Del Usuario página 9

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 17
measuring unit to °C or °F.
Press the SET button again, the "°C" is flashing. Press the + button to set temperature
measuring unit to °C or °F.
Press the SET button again, the "FAC" is flashing. Press and hold the + button if you want to
reset the station to factory settings.
Press the SET button to confirm and exit the setting. You will return to the normal display
mode.
Notes:
If no buttons are pressed within 15 seconds, set mode will time out and return to normal
display mode, reflecting whatever adjustments were made by user before the set mode timed
out.
Press the + button once to adjust setting value by 1 unit, hold the button to speed up the
setting.
DEW Point, MAX and MIN values
In normal display mode, press the MAX/MIN/RESET button to view the MIN values of indoor
temperature and humidity, outdoor temperature and pool temperature.
Press the MAX/MIN/RESET button again to view the MAX values of indoor temperature and
humidity, outdoor temperature and pool temperature.
Press the MAX/MIN/RESET button again view the dew point value instead of indoor
temperature. "DEW POINT" will be displayed at the display..
Press the MAX/MIN/RESET button again to return to normal display mode.
Notes:
Press and hold the -/MAX/MIN button to clear MAX and MIN values from memory.
After 30 seconds without pressing a button the display will return back to the normal display
mode.
Precautions
This main unit is intended to be used only indoors, the outdoor sensors are to be used outdoors.
Do not subject the unit to excessive force or shock.
Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity.
Do not immerse in water.
Avoid contact with any corrosive materials.
Do not dispose this unit in a fire as it may explode.
Do not open the inner back case or tamper with any components of this unit.
Batteries safety warnings
Use only alkaline batteries, not rechargeable batteries.
Install batteries correctly by matching the polarities (+/-).
Always replace a complete set of batteries.
Never mix used and new batteries.
Remove exhausted batteries immediately.
Remove batteries when not in use.
Do not recharge and do not dispose of batteries in fire as the batteries may explode.
Ensure batteries are stored away from metal objects as contact may cause a short circuit.
Avoid exposing batteries to extreme temperature or humidity or direct sunlight.
EN4

Publicidad

loading