Functions - Mitsubishi Electric PAC-SC30GRA Libro De Instrucciones

2. Functions

• This unit can control a maximum of 16 air conditioner units. The operation listed below are also
possible.
<List of group remote controller functions>
Item
ON/OFF
Operation mode
Fan speed
Temperature setting
Opera-
tions
Horizontal blow
Air direction/swing
Ventilation operation
Timer operation
Filter reset
Collective operation
Each group operation
Operation mode
Fan speed
Temperature settings
Horizontal blow
Monitor-
Air direction/swing
ing
Ventilation operation
Timer operation
Filter sign
Prohibition
Malfunction
Group settings
Opera-
tions
Interlocked settings
Monitor Malfunction history
Master system
controller/slave
system controller (*1)
System
Group remote
controller's address
4
ON/OFF operations for the collective or each group.
Switches between cool/dry/fan/auto/heat for the collective or each group.
Switches between high /low for the collective or each group (switches
the fan speed through four stages from 1 to 4)
Sets the temperature for the collective or each group.
Range of
temperature settings
Starts and stops horizontal blow operations for the collective or each
group.
Operates the vertical fan and swing fan for the collective or each group.
Switches the interlocked ventilation unit between stop/high/low for the
collective or each group.
Switches between activating and suspending scheduled operations that
use a program timer (sold separately) for the collective or each group.
Resets the filter sign after the filter has been cleaned for the collective or
each group.
The overall status lamps display condition of the collective status.
Liquid crystal display
Displays the unit address of the malfunction unit and the error code on
the liquid crystal display
Performs the group settings for the unit (indoor unit, remote controller,
slave system controller)
Performs the interlocked settings for fresh masters and other ventilation
unit.
Displays the history of the ten malfunctions.
Master and slave settings for the system controller.
Address setting for the group remote controller.
Specification
Cool/Dry operations : 19 °C to 30 °C
Heat operations :
Auto operations :
17 °C to 28 °C
19 °C to 28 °C