WALL-MOUNTED CERAMIC FAN HEATER SKWH 2000 A2
1. Introduction
Congratulations on the purchase of your new fan
heater. You have opted for a high quality product.
The operating instructions are part of this product.
They contain important information on safety, usage
and disposal. Familiarise yourself with all operating
and safety instructions before you use the product.
Use the product only as described and only for
the specified areas of use. When passing on the
product, please do not forget to hand over all the
necessary documents to the new user.
1.1 Intended Use
This device is only intended for heating closed
rooms. The device is not intended for use in special
conditions, for example, in a corrosive or explosive
area (dust or gas). Do not use the device outdoors.
Any other use or modification of the device is
deemed to be an improper use and means a
considerable risk of accidents. For damage caused
by the improper use, no liability will be accepted by
us. This fan heater is only intended for private use as
a supplementary heater.
1.2 Scope of delivery
1 Wall-mounted ceramic fan heater SKWH 2000 A2
2 Fastening screws
2 Wall dowels
1 Remote control (incl. button cell)
1 Operating Instructions
1.3 Equipment
Items 1-13, as well as A-G are written on the front
fold-out side.
1 ON/OFF button
2 Oscillation button
3 Window button
4 Timer button
5 OK button
6 Cancel button
7 Minus button
8 Plus button
9 Week-Timer button
Temperature button
10
Heating level button
11
Tab
12
Batterycompartment
13
A Heating level display
B Week-Timer display
C Timer button
D Oscillation display
E ON/OFF button & Heating level button
F Temperature display
G Air slot/Air outlet
H-J are given on the rear fold-out side.
H ON/OFF button
I Fastening screws
J Wall dowels
GB/IE/NI/CY/MT
7