Publicidad
8. Route the remaining portion of the
T-Connector harness down through the bumper
access in the taillight opening (Fig. 3). Continue
routing the T-Connector harness ends with the
green and red wires to the right (passenger)
side of the vehicle and up through the opening
behind the right taillight assembly. Position the 4-
flat trailer connector near the center of the rear bumper.
9. Repeat steps 4 & 5 for the right (passenger) side, using
the connector ends with the green and red wires.
10. Confirm correct operation with a test light or by using a
properly equipped trailer. Note: All connections must be
complete for the T-Connector harness to operate.
11. Secure all wires using cable ties (provided). The
T-Connectors black box should be secured within the left
(drivers) side tail light opening.
12. Re-install both taillight assemblies using the fasteners
removed in step 2.
Fig. 3
Publicidad
