Descargar Imprimir esta página

Farfisa TD4100PL Manual Del Usuario página 10

Publicidad

PROGRAMMING
Before programming you must:
Press the button
PROG on the back of
the push-button panel using a small
screwdriver; the displays shows " Pro-
gramming / type: ".
Dial the programming code ( see ta-
ble 1 ) and press
to confirm.
Once you have programmed each
code, press the button
PROG again;
the display shows " FARFISA / dial the
number or press
" or the text set
during the programming phase (see
"Personalisation of display initial
text").
Table 1
Programming codes
00 Entry of codes for door lock
01 Entry-modification-deletion of
names
02 Language selection
03 System programming
04 Entry of display initial text
05 Loading names from PC
06 Ordering names
10 Address door station (PE)
11 Address push-button P1
Entry of codes for door lock (code
00)
Enter the programming mode and insert
00 to access the "entry of codes
code
for door lock" mode; the display shows
" PASSWORD 0 /
".
Dial the first opening code on the
keypad, for example 7890; the display
shows "PASSWORD 0 / 7890".
Press
; the display shows
"PASSWORD 1 /
".
Dial the second opening code on the
keypad, for example 1234; the display
shows "PASSWORD 1 / 1234".
Press
; the display shows
"PASSWORD 2 /
".
Repeat the operations to insert max.
16 codes; when you press the button
to confirm the sixteenth code
(PASSWORD 15) the display shows
"Programming / type: ".
Continue by entering the code of a
new programming function or press
the button
PROG to exit.
Modifying a code
To change the previously saved code
you must enter the programming mode
and then:
select the programming code 00;
press the button
until the code you
want to modify is displayed;
press
to go to the code you want to
modify;
enter the new code on the keyboard
and then press the button
repeat the operation for all the codes
you want to modify;
press the button PROG to exit the
programming mode.
Deleting a code
To delete the previously saved code
you must enter the programming mode
and then:
select the programming code 00;
press the button
until the code you
want to delete is displayed;
press the button
and then
repeat the operation for all the codes
you want to modify;
press the button PROG to exit the
programming mode.
Entry / modification / deletion of
names (code 01)
The digital keyboard TD4100PL has
an alphanumerical display with 32
characters that displays the user name
and extension number (28 characters
are used for user name and the last 4
characters on bottom right are used for
extension number). To save them, you
must follow the procedure illustrated
below. The name must be entered
starting from the first character on top
left and the last digit of the extension
number must be entered in the last
position on bottom right, otherwise the
number will not be saved (see "deletion
of names").
After you have entered all the names,
the system will automatically arrange
them in alphabetical order.
Example
YES
Function of buttons when entering
or modifying a name
Hold this button pressed to scroll the
list of existing names
Hold this button pressed to move the
cursor to the name characters
Hold this button pressed to scroll down
the list of characters
Hold this button pressed to scroll up
the list of characters
;
When searching for characters, the display
shows upper-case letters, low-case letters,
numbers, special characters and space
in a sequence.
Entry of names
Press the button
programming mode.
Enter the code 01 and press the button
; the display shows the first name.
The display is empty if no codes are
programmed.
Press
or
to select the character for
;
the first cell; press
cell; press or to select the character
for the second cell; continue until you
have entered the complete name with
code. Press
the number in the last cell on bottom
right; the display shows "STORE USER
/ YES
NO "; press
press
to modify the name.
If confirmed, the display shows the
second name. The display is empty if no
names are programmed.
Press the button
firm the last name to insert. The display
shows " waiting" and an automatic sta-
tus bar. Normal operation is restored
after a few seconds and the display
shows the initial text (see " Operation").
Notes. Once you have entered 250 names
the display shows " waiting" and an
automatic status bar. After a few seconds
the display shows "Programming / type: "
and you can continue with programming
or press the button PROG to exit.
You can enter 2 or more names with the
same call number (i.e. different family
names in the same apartment).
NO
PROG to enter the
to go to the second
after you have entered
to confirm;
PROG again to con-
10
Mi 2373

Publicidad

loading