Maintenance; Specifications Product Identification; Product Description - CAMPAGNOLA POWER 12 Manual De Uso Y Mantenimiento

2 - SafetY PrecautIonS

2.3 maintenance

WarnInG!
Before performing any maintenance operations or adjustments of the mechanical parts of the equipment, wear protec-
tive shoes, gloves and goggles.
• Routine maintenance and repairs can be carried out only by an operator with the necessary physical and intellectual
qualifications.
• Special maintenance and repairs can be carried out only by a service mechanic.
• Keep bystanders away when servicing or repairing the machine.
• Only service mechanics are authorized to inactivate the safety devices provided on the machine when maintenance is to
be performed. It is their responsibility to safeguard the operators and the machine. The safety devices shall be activated as
soon as the maintenance operations have been completed.
• Before any maintenance operations or mechanical adjustments are carried-out, switch the tool off.
• All maintenance procedures not dealt with in this manual are to be performed at a CAMPAGNOLA S.r.l Authorized Service
Point.
• When maintenance or repairs have been completed, the machine can be started again only if duly authorized by the
service mechanic. The service mechanic must make sure:
- work has been completed;
- the machine runs in a trouble-free way;
- the safety devices are activated;
- no one is working on the machine.
3
- SPecIfIcatIonS
3.1 Product identification
The tool identification details are indicated on the plate (5) on the handgrip, on the tool box and in the CE compliance certificate
in this manual.
3.2 Product description
The electro-mechanical, battery supplied POWER 12 unit has been created to operate harvesting tools. The scheme "PRODUCT
ASSEMBLY" POSSIBILITIES (in par. 2.1.1) shows the possible combinations among power unit, extension pole and harvesting
head, in order to find the best solution for the task to be carried out.
The power unit is powered by a 12 V lead battery. The battery capacity (Ampere) determines the work duration only.
The power unit is composed by a hand grip body and a gearbox. On the hand grip body (1) there are an ON/OFF switch (7),
which starts and stops the tool and a red led light (9), which shows if the tool is on or off.
On the body there is a connector (4), which, by means of a cable, joins the power unit with the battery.
On the top of the hand grip body (1) there is a clamp connection (3) for the fixed (12) or telescopic (11) extension pole, which
transmits motion to the tool.
WarnInG!
Please mind the tool was created for the aim indicated in this manual. It is not possible to connect the battery of one
version with the cable of the other one.
19 - 68