Explanation Of Symbols - MACHEREY-NAGEL NANOCOLOR VARIO C2 Manual

4. Explanation of symbols

The device type plate and these operating instructions contain the symbols or terms listed
below, which have the following meaning:
Term / Symbol
NANOCOLOR VARIO 4
®
SN
110/230 V, ~50/60 Hz
300/550 VA
MACHEREY‑NAGEL
Manual heating block NANOCOLOR
Meaning
Device type designation
Serial number of the device
Power supply
Power consumption
Attention (observe documentation)! Observe the safety instructions in the
operating instruction of the device
According to 2012/19/EU, it is prohibited to dispose of the device through
public waste disposal systems. Note also the information in the "Disposal"
section.
The CE symbol indicates fulfillment of the applicable harmonization legislation of
the European Community.
Identification USB interface
Identification of the manufacturer
This symbol indicates that there is a risk of electric shock.
This symbol indicates that the chemicals used have a corrosive effect.
Observe the safety measures in the laboratory and wear the suitable protective
equipment. Observe the instructions in the current safety data sheets (SDS) of
the products used.
This symbol indicates that there may be a danger by using flammable
substances.
This symbol indicates that the designated area can become hot and must not
be touched without suitable protective measures.
Explanations to the text. Tips and tricks for better handling.
VARIO C2 / VARIO 4 EN, 08.2021
®
35