Display Settings - MACHEREY-NAGEL NANOCOLOR VARIO C2 Manual

12.1.5 Date/Time
Pressing takes you to the date and time settings (Figure 12). Enter the time in the form
hh:mm. Select the date field by touching it. Enter the date in the form dd:mm‑20yy and confirm
with .
12.1.6 Protective cover warning
Pressing displays a window for switching the protective cover warning on (icon
off (icon Select the desired setting and confirm with
If the protective cover warning is activated and the cover is not closed, an icon appears in the
start screen during measurement and an entry is generated in the error log.
It is recommended to activate the protective cover warning and close the cover.

12.1.7 Display settings

Pressing takes you to the display settings (Figure 13). By pressing the arrow keys
and , you can adjust the brightness
the desired conditions. Select the desired settings and confirm them with
Manual heating block NANOCOLOR
Figure 12: Setting the date and time
NOTICE
, contrast
Figure 13: Display settings
VARIO C2 / VARIO 4 EN, 08.2021
®
.
and the saturation of the display
) and
to
.
47