Scope Of Delivery; Connecting The Device; Transport - MACHEREY-NAGEL NANOCOLOR VARIO C2 Manual

8.1 Scope of delivery

Check the delivery for completeness. If parts of the delivery are missing, contact
n
MACHEREY‑NAGEL or your local distributor directly.
Heating block NANOCOLOR
n
Power cable
n
Fuse with socket, Size: 5x20mm T3,15AH (time lagging, high breaking capacity)
n
1 × protective cover (VARIO C2 and VARIO C2 M only)
n
2 × protective cover (VARIO 4 only)
n
USB data cable (A/B)
n
Software DVD
n
Quick start Guide
n

8.2 Connecting the device

Use only the approved power cord.
The separately packed fuse of the heating block is marked by a sticker in the delivery box.
1. Remove the fuse and insert it into the socket on the back of the heating block. The insertion
direction is determined by the locking device. (Figure 2)
2. Place the supplied protective hood(s) on the device.
3. Connect the supplied power cord to the unit and then to the power outlet.

8.3 Transport

To transport the device, the delivery box with its protective interior is best suited. Therefore,
keep the packaging. If you no longer have the packaging in hand, use a suitable cardboard box
as outer packaging and soft padding material so that the device cannot slip during transport.
Manual heating block NANOCOLOR
40
VARIO C2 / VARIO C2 M / VARIO 4
®
Figure 2: Insertion of the fuse into the heating block
NOTICE
VARIO C2 / VARIO 4 EN, 08.2021
®