System Settings; Error Log; Performing A Digestion; Sample Preparation - MACHEREY-NAGEL NANOCOLOR VARIO C2 Manual

Ocultar thumbs Ver también para NANOCOLOR VARIO C2:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

12.1.8 Signal tone
Pressing
takes you to the signal tone settings. Use the arrow keys
adjust the volume. The setting is indicated in the status line by the icon
settings and confirm with
When the signal tone is activated, different device states (e.g. finished digestion) are indicated
acoustically.
12.1.9 T‑Set
Press
to access test equipment monitoring with the T‑Set. Here you can independently
carry out quality controls with the NANOCOLOR
T‑Set (REF 919917). For further details, refer to chapter Quality Control, page 53.

12.1.10 System settings

Pressing
takes you to the menu for restoring the factory settings. Press
reset the factory defaults for the following settings:
User‑defined temperatures
User‑defined heating times
Display settings
Sound settings
Select the desired setting that you want to reset to factory defaults and confirm with
The service menu (icon
exclusively for service personnel for service work.

12.1.11 Error log

Press
to enter the error log menu. A window appears with a list of the errors that have
occurred.
All system messages that have occurred are logged. The messages can be filtered by the
categories Notes/Warnings and Error messages by clicking on the respective icon.
12.1.12 WAV‑Player
To use the "WAV File Player", contact MACHEREY‑NAGEL.

13. Performing a digestion

13.1 Sample preparation

Risk of chemical burn: Test kits with corrosive and dangerous substances. Wear
suitable protective equipment when working with the cuvettes. Refer to the Safety
Data Sheet (SDS) of the test kit used.
Cuvettes can overheat! Risk of burns, chemical burns and cuts. Check the digestion
conditions. Check the notes and instructions in the operating manual of the test kit
used. Pay particular attention to the specified digestion temperatures and digestion times.
Manual heating block NANOCOLOR
48
.
®
) is secured by a service code. The use of this menu is reserved
WARNING
WARNING
USB T‑Set (REF 919921) or NANOCOLOR
VARIO C2 / VARIO 4 EN, 08.2021
®
and
to
. Select the desired
®
again to
.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Nanocolor vario 4

Tabla de contenido