Dvr Power On; Date And Time Setting; Clear Hard Disk - IVS System AVD744C Manual Del Usuario

2.5 DVR Power On

This device should be operated only with the type of power source indicated on the manufacturer's label. Connect
the indicated AC power cord to the power adapter, and plug into an electrical outlet. The power LED will be on.
Note: Before the DVR is powered on, make sure (1) the cameras are connected and power-supplied for
the detection of the camera video system to be correct, and (2) a monitor (either LCD or CRT
monitor) is connected to the DVR for correct video output detection.
Note: To ensure that your DVR works constantly and properly, it's recommended to use an UPS,
Uninterruptible Power Supply (Optional), for continuously operation.

2.6 Date and Time Setting

Before operating your DVR, please set the date and time on your DVR FIRST.
Note: Please DO NOT change the date or time of your DVR after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording
function is activated, it's recommended to clear all HDD data, and start recording again.
Note: For the first time to use the DVR, please power it on for at least 48 hours continuously after the
date & time is set correctly. It helps to prevent DVR time from resetting after the disconnecting of
DVR power. If the DVR time resets after the disconnecting of DVR power, for example, caused by
a power outage, the battery might run out and please replace the battery as described in
"APPENDIX 6" in the DVR user manual.
Right-click to enter the DVR password with the password keypad. The default administrator password is 0000.
The status will be changed from
and select "QUICK START"
GENERAL
TIME SETUP
EXIT

2.7 Clear Hard Disk

It's recommended to clear all data in the hard disk for the first time to user this DVR to ensure the recorded data
are not mixed with other data previously saved in the same hard disk.
Right-click to show the main menu, and select "SYSTEM"
reboot when HDD data are cleared. For details, please refer to "5.3.2 SYSTEM INFO" in the DVR user manual.
(key lock) to
"TIME SETUP" to set the date & time.
QUICK START
DATE
TIME
(administrator). Then, right-click to show the main menu,
2009 / NOV / 17
15 : 35 : 53
"SYSTEM INFO"
4
"CLEAR HDD". The DVR will