APPENDIX 1. SET IPHONE PUSH NOTIFICATION
This IVS DVR series supports instant event notifications to your iPhone with our self-developed program,
"EagleEyes", installed. When a man is detected by a human detection camera, the DVR will immediately receive
alarm signals and send to your iPhone.
Note: iPhone is the registered trademark of Apple Inc.
Note: EagleEyes is a powerful mobile surveillance program developed by AV TECH Corporation. For more
operations details about EagleEyes, please visit http://www.eagleeyescctv.com.
For any comment or question about this program, please send to marketing@avtech.com.tw. Your
feedback is always welcomed.
You need to finish some settings in your iPhone for this function to work properly. For details, please refer to "A1.1
Prerequisite" at page 15.
A1.1 Prerequisite
Before setting this function, make sure you have checked the following:
You have an iPhone with our self-developed program, "EagleEyes", installed. For details, please refer to "A1.2 Set
iPhone" at page 15.
A human detection camera, AVM602V, is connected to your IVS DVR.
The event record function of your IVS DVR is not disabled.
The motion detection function of your IVS DVR is not disabled.
Your IVS DVR is connected to Internet. For details, please refer to
http://www.surveillance-download.com/user/CMS.pdf.
A1.2 Set iPhone
A1.2.1 Program Download
STEP1: Go to "App Store" via your iPhone.
STEP2: Search the program with the keyword "eagleeyes".
Note: You might be charged for Internet access via wireless or 3G networks. For the Internet access rate
details, please check with your local network operator or service provider.
STEP3: Read the introduction of the program if needed, and select "INSTALLED" to start the installation.
Follow the on-screen instructions to download and install the program. "
desktop for quick access when the program is installed successfully.
15
" will be shown on the iPhone