Appendix 2. Set Flow Counting / Virtual Fence / One Way - IVS System AVD744C Manual Del Usuario

APPENDIX 2. SET FLOW COUNTING / VIRTUAL FENCE / ONE WAY

Note: Before using the IVS function, make sure the event record function is enabled on your DVR.
IVS, Intelligent Video Surveillance, is the advanced application for motion detection, but more precise and smarter.
It can be applied to different situations with one of the following three modes: FLOW COUNTING, VIRTUAL
FENCE, and ONE WAY.
Note: Four camera channels are supported for this function. For AVD748BD and 746BD, users are
allowed to select four camera channels randomly to use this function; for AVD744BD, AVD744B,
AVD744CD and AVD744C, all the four camera channels are supported.
Right click to show the main menu, and select "
CANERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
EXIT
1) CAMERA
(For AVD748BD & 746BD only)
Select the camera channel that you want to use the IVS function.
2) IVS MODE
Select one of the following three modes depending on your environment:
MODE
FLOW COUNTING
VIRTUAL FENCE
ONE WAY
3) DISPLAY LINE
Select to display the detection line for IVS on the screen or not.
4) SENSITIVITY
Set the sensitivity for IVS from 00 ~ 15. The larger the value, the more sensitive the IVS will be.
5) RESET COUNT
Click "SUBMIT" to reset the flow counting number to 0 when the IVS mode is set to "FLOW COUNTING" and
activated.
6) VIRTUAL FENCE AREA
Click "SETUP" to draw the detection line for IVS, and set the detection direction. This area setting is the
detection base for IVS MODE.
Note: There are some tips to draw the detection line. For details, please check
www.surveillance-download.com/user/IVS_setup.pdf.
ADVANCED CONFIG
IVS1 IVS2 IVS3 IVS4
CAMERA (For AVD748BD & 746BD only)
IVS MODE
DISPLAY LINE
SENSITIVITY
RESET COUNT
VIRTUAL FENCE AREA
SCENE CHANGE
SCENE CHANGE LEVEL
DESCRIPTION
A virtual detection line is set to detect the moving direction of pedestrians for flow counting.
A virtual detection line is set to detect intruders crossing the detection line, and an alarm will be
triggered.
A virtual detection line is set to detect intruders from the specified direction, and an alarm will be
triggered.
" "ADVANCED CONFIG"
CH3
FLOW COUNTING
OFF
07
SUBMIT
SETUP
OFF
MIDDLE
18
"IVS".