Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

TOOLS NEEDED:
Drill Bits: 7/16", 9/16" & ¼"
Failure to follow all of these instructions may result in death or serious injury!
©
2011 Cequent Performance Products, Inc.
Installation Instructions
Snap Up Bracket
Read all instructions before installing the additional bolt.
•Installation of an additional bolt into the snap up bracket.
•Mark the location of the hole to be drilled into the snap up bracket.
Center the hole from left to right and place it 2-1/4" above the arc in
the bracket. See the picture at left.
2-1/4"
•Before the bracket is placed on the frame, drill a 9/16" hole in the
bracket
•Place the bracket in the correct place on the frame as directed in the
product instructions or replace it where it was if it had already been
installed.
•Using the hole in the bracket as a guide, drill a ¼" pilot hole. Be sure
to stay centered in the bracket hole.
• One method to stay centered is to use the 9/16" drill first. Just put a
small dimple into the frame with the 9/16" bit. Then finish drilling
with the ¼" drill bit and then a 7/16" drill bit to get the final hole. See
pilot hole to the left.
•Install the ½" self tapping screw into the hole in the bracket and
frame. Tighten it to 50 ft/lbs.
•Re-tighten the ½" set screw on the inside of the frame. Turn only
¼ to ½ of a turn after making contact with the frame.
For Installation or Operation Support contact CPP Technical Service: 1-888-521-0510.
Cequent Performance Products, Inc.
47912 Halyard Dr. Suite 100
WARNING:
PARTS LIST
QTY
DESCRIPTION
2
1/2" x 1.00" SELF TAPPING SCREW
1
INSTRUCTION SHEET
Plymouth, MI 48170
Sheet 1 of 3
Part Number:
58459N
08/24/11
58459
Rev. A

Publicidad

loading

Resumen de contenidos para Cequent Performance Products 58459

  • Página 1 1/2" x 1.00" SELF TAPPING SCREW INSTRUCTION SHEET For Installation or Operation Support contact CPP Technical Service: 1-888-521-0510. Cequent Performance Products, Inc. 47912 Halyard Dr. Suite 100 Plymouth, MI 48170 © 2011 Cequent Performance Products, Inc. Sheet 1 of 3 58459N 08/24/11 Rev. A...
  • Página 2 Para apoyo con la instalación u operación, póngase en contacto con el Servicio Técnico de CPP: 1-888-521-0510. Cequent Performance Products, Inc. 47912 Halyard Dr. Suite 100 Plymouth, MI 48170 © 2011 Cequent Performance Products, Inc. Hoja 2 de 3 58459N 08/24/11 Rev. A...
  • Página 3 Pour de l'assistance concernant l'installation ou le fonctionnement, contacter le service technique CPP : 1-888-521-0510. Cequent Performance Products, Inc. 47912 Halyard Dr. Suite 100 Plymouth, MI 48170 © 2011 Cequent Performance Products, Inc. Feuille 3 de 3 58459N 08/24/11 Rev. A...