Horizon Global 76183 Instrucciones De Instalación página 9

3. Install hitch –Use silicone sealant to seal around the opening on the end panel both sides, see Figure 3. Raise
the hitch into position and loosely install (8) existing factory M10 bolts to the hitch and end panel, see Figure 1.
4. Tighten all M10 fasteners with torque wrench to 53 Lb.-Ft. (72 N*M).
Proper torque is needed to keep the hitch secure to the vehicle when towing.
©2017 Horizon Global™ Corp - Printed in Mexico Sheet 9 of 30 76183NP 07-19-17 Rev. A