Fuel Requirements; Battery Requirements; Battery Charger; Engine Oil Requirements - Generac 0060550 El Manual Del Propietario

Fuel Requirements

DANGER
Explosion and Fire. Fuel and vapors are
extremely flammable and explosive. Add fuel
in a well ventilated area. Keep fire and spark
away. Failure to do so will result in death
or serious injury.
The engine has been fitted with a dual fuel carburetion
system. The unit will run on natural gas or LP gas
(vapor), but it has been factory set to run on natural gas.
The fuel system will be configured for the available fuel
source during installation.
Recommended fuels should have a BTU content of at
least 1000 Btus per cubic foot (37.26 megajoules per
cubic meter) for natural gas, or at least 2500 BTUs per
cubic foot (93.15 megajoules per cubic meter) for LP gas
(vapor).
NOTE: If converting to LP gas from natural gas, a
minimum LP tank size of 250 gallons (946 liters) is
recommended. See the Installation Manual for complete
procedures and details.

Replacement Parts

Description
26R Exide Battery
Spark Plug
Oil Filter
Air Filter
Control Panel Fuse
Transfer Switch Fuses
Owner's Manual for 60 Hz Synergy Generator™

Battery Requirements

Group 26R, 12V, minimum 540 CCA.
For proper battery maintenance procedures, see Section
4 Maintenance.

Battery Charger

(000105)
The battery charger is integrated into the control panel
module in all models. It operates as a Smart Charger
which ensures output charging levels are safe and
continuously optimized to promote maximum battery life.

Engine Oil Requirements

For proper oil viscosity, see chart in
20 kW Synergy
0H3421S
0G0767A
070185E
0J8478
0D7178T
073590A
General Information
Figure 4-1.
9