To Set An Alarm In Alarm Mode; Configure Mode; Configure Mode Terminology; Configure Mode Setting Groups - Timex M821 Manual Del Usuario

TO SET AN ALARM IN ALARM MODE

For instructions on setting Watch functions, including Alarm
Mode, refer to page 13, "To set Watch functions."
For Alarm Mode, you can set the following values:
Alarm number (ALM 1 through ALM 5).
Alarm status (OFF or ON).
You can also press START/SPLIT to switch the alarm status.
Alarm type (WEEKDAYS, WEEKENDS, ONCE, or DAILY).
A DAILY alarm will ring every day at the selected time, a
WEEKDAYS alarm will ring Monday through Friday at the
selected time, a WEEKENDS alarm will ring Saturday and
Sunday at the selected time, and a ONCE alarm will only ring
one time at the selected time and then automatically turn off.
Alarm time (hours, minutes and AM/PM if the time is set to 12-
hour format).
NOTE: If you change any alarm settings, you automatically arm
the alarm.
56

Configure Mode

INDIGLO®
night-light
Press when done
viewing options
Press to activate
a Quick Set

Configure Mode terminology

Quick Set: By pressing START/SPLIT when the + sign appears,
you may easily change the most common setting for the setting
group without initiating the entire setting procedure.
NOTE: In the Configure Mode section, terminology will also
appear in the section for the setting group to which it
applies.

Configure Mode setting groups

Use Configure Mode to set options that enhance the performance
of other Watch modes. Configure Mode settings include six setting
groups:
HRM SETTINGS: Heart rate settings allow you to set target
zones for your heart rate.
option
Select an item
option
57