PJX Series Balance
3. After confirmation by pressing Yes, the message
Clr.APwj will appear on the screen.
4. Press Yes, and the message Put10 will display with
the numeral 10 (default) flashing. The user can
press No or Back to increase or decrease the value.
For instance, to increase the value to 15, please
press
Yes.
simultaneously.
5. Place 15 samples on the pan. Press the Function /
Mode button so that the weight of the 15 samples is
used to establish the average piece weight (APW).
The display will show15 pieces.
6. Remove the 15 samples from the pan and then
place
additional
corresponding number of pieces will display on the
screen.
7. To view the total weight or the number of pieces of
the objects, press the Function / Mode button.
Put
15
Then,
and
samples
on
the
will
flash
pan.
The
EN-9