Servicing The Tacker; Cleaning The Housing And External Surfaces; Slight Contamination; Heavy Contamination - Prebena 1GP-ALK35 Manual Original

Servicing the tacker

Servicing the tacker
The tacker must only be serviced by persons with the required
knowledge, skills and experience. Any work not described here must
only be carried out by the manufacturer's customer service
department or at the manufacturer.
 Disconnect the tacker from the compressed air supply prior to
cleaning work.
 Empty the magazine.

Cleaning the housing and external surfaces

CAUTION
Unsuitable cleaning agents can cause damage to the tacker or
accessories.
 Clean only with a dry or slightly damp cloth, or a cloth
dampened with a mild soap solution.

Slight contamination

 Wipe the tacker housing with a dry cloth.
 Oil all metal parts of the tacker thinly with PREBENA special
nailer oil.

Heavy contamination

 Wipe the tacker housing with a cloth dampened slightly with a
mild soap solution.
 Then wipe the housing with a cloth dampened slightly with tap
water.
 Rub down with a soft, dry cloth afterwards.
 Oil all metal parts of the tacker thinly with PREBENA special
nailer oil.
26
WARNING
Accidental triggering when emptying the magazine
can lead to serious or even fatal injuries.