Installing Magicwatch; Tools Required - Waeco MagicWatch MWE150 Instrucciones De Montaje Y De Uso

MWE-150-2.book Seite 30 Freitag, 3. Februar 2006 4:52 16
All manuals and user guides at all-guides.com

Installing MagicWatch

Example 3 (8, page 5)
For diagonal obstacles, the shortest distance A is signalled.
Example 4 (9, page 6)
In this case, MagicWatch displays the distance A. As the vehicle approaches
the audible indicator goes over to the stop zone, and as it approaches further,
the distance A goes into the blind spot, so that MAGIC WATCH signals the
distance from point B.
Caution!
As these four examples show, situations can arise where the de-
vice fails to display an object or does not display the shortest dis-
tance.
The device does not relieve you of your obligation to take special
care when reversing. Therefore, always be extremely careful
when reversing.
If an object enters the blind spot of the sensors, MagicWatch auto-
matically shows the distance to the next object. This means the
speaker changes from fast to medium beeps.
In this case, always stop the vehicle immediately and check the
situation.
6 Installing MagicWatch
6.1

Tools required

For installation and assembly you require the following tools:
Drill bit set (1 1, page 3)
Drill (1 2, page 3)
Screwdriver (1 3, page 3)
Set of ring or open-ended spanners (1 4, page 3)
30
MagicWatch MWE150