Allegion Schlage B80 Instrucciones De Instalación

2¹⁄₄" 1³⁄₄" 1³⁄₈"
Mark Center of Door Width
for Faceplate or Drive-In
A Measure from Fold to Center
¹⁄₂ of 2¹⁄₄ in.
¹⁄₂ of
Drill 1" (25 mm) Hole
B
for Faceplate
OR
for Circular Drive-In
TEMPLATE
B80/B580
D261
Measure 2³⁄₈" (60 mm) BACKSET
1
1³⁄₈ in.
1 Measure 2³⁄₄" (70 mm) BACKSET
© 2014 Allegion
Printed in U.S.A.
P515-773 Rev. 01/14-e
P515-773
NOTE: If Door is Beveled,
Place Template on High Side
Drill 1¹⁄₂" Dia. Hole
2
Halfway Thru Door +
2
³⁄₈"
Half Width +
³⁄₈"