Specifications; Attachments/Accessories - Toro 38701 Manual De Instrucciones

Ocultar thumbs Ver también para 38701:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Wheel-Clutch Levers
The wheel-clutch levers are located below the right
and left handles.
The wheel clutch levers allow the drive to momentarily
disengage to 1 or both wheels with the traction-drive
lever squeezed. This allows for easier turning and
maneuvering the machine
Note:
Squeezing both wheel clutch levers
simultaneously disengages the drive to both wheels
(free-wheeling). This enables you to manually move
the machine backward without stopping to shift it into
a reverse gear. It also allows you to maneuver and
transport the machine more easily when the engine
is not running.
1. Wheel-clutch lever
2. Handle
3. Broom-angle lever
Broom-Drive Lever
The broom-drive lever is located above the right
handle
(Figure
6).
To engage the broom, squeeze the lever to the handle.
To disengage the broom, release the right lever.
Traction-Drive Lever
The traction-drive lever is located above the left
handle
(Figure
6).
The traction-drive lever controls the forward and
reverse motion of the machine. To engage the traction
drive, squeeze the lever to the handle.
Note:
Holding down the traction-drive lever against
the handle engages the traction drive to both wheels.
(Figure
6).
Figure 6
4. Traction-drive lever
5. Speed-selector lever
6. Broom-drive lever
Speed-Selector Lever
The speed-selection lever is located on the main
console panel
(Figure
The speed selector has 6 forward and 2 reverse
settings. To change speeds, release the traction-drive
lever, and shift the speed-selector lever to the desired
setting. The lever locks in a notch at each speed
setting.
Broom-Angle Lever
The broom-angle lever is located at the right handle
(Figure
6).
The broom-angle lever controls the angle lock. The
broom angle can be locked into 3 positions: straight
ahead, or angled to the left or right 19°.

Specifications

Width
Length
Height
Weight
Engine speed (no load)
g325105
Fuel tank capacity

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
8
6).
118 cm (46.5 inches)
185.5 cm (73 inches)
105.5 cm (41.5 inches)
151 kg (333 lb)
Full speed: 3600 ± 100 rpm
4.1 L (1.0 US gallon)
www.Toro.com
for a list of all

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido