Skoda BFC 400 001 Instrucciones De Montaje página 20

- 14 -
- Connect the end of the free red wire with the eye under the second screw (from the left) of
the distributor -arrow-. Use the OK 10 socket wrench. Tighten the screw with a tightening
torque of 20 Nm.
- 15 -
GB
- Connect the end of the free red wire (alveolar) and the red wire from the cable bundle to the
fuse box at fuse no. 49 -arrow-.
- After replacing the fuse box, insert the 15A fuse (O) into the place for fuse no. 49.
- 16 -
Connect the central locking electrical installation cable bundle in the following man-
ner:
- driver's side:
- click the white T6j bundle terminal box (blade) into the lower section of the terminal box
holder in the front column (this terminal box has a connected brown/green wire for the
option of connecting the central locking, if the vehicle is equipped with electric windows).
Connect the white front door motor terminal box (hollow) (I) to the thus positioned termi-
nal box.
- click the blue T6l bundle terminal box (blade) into the upper section of the terminal box
holder in the central column. Connect the blue rear door motor terminal box (hollow) (L) to
the thus positioned terminal box.
- the brown wire with the eye (picture 13).
- passenger's side:
- click the white T6k bundle terminal box (blade) into the lower section of the terminal box
holder in the front column. Connect the white front door motor terminal box (hollow) (I) to
the thus positioned terminal box.
- click the blue T6m bundle terminal box (blade) into the upper section of the terminal box
holder in the central column. Connect the blue rear door motor terminal box (hollow) (L) to
the thus positioned terminal box.
- the front section:
- place the red wire with the alveolar in the XP1 (T6o) terminal box - PIN 6 of the vehicle' s
central control unit.
- the free red wire (pictures 14, 15).
- 17 -
- The inspection diagram for the connection is depicted on the central locking control unit.
- 18 -
- Insert the two black nine pole terminal boxes (hollow) (P) into the free spaces in the rear
side of the relay box according to the picture.
- Insert the central locking control unit (R) into the black nine pole terminal boxes.