Philips Saeco GranAroma Deluxe SM6682/10 Manual De Instrucciones página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 130
14
English
Regular cleaning and maintenance keeps your machine in top condition and ensures good-tasting
coffee for a long time with a steady coffee flow.
Consult the table below for a detailed description of when and how to clean all detachable parts of
the machine. You can find more detailed information and video instructions on www.saeco.com/care.
See figure C for an overview of which parts can be cleaned in the dishwasher.
Item
AquaClean filter
The machine does not automatically detect that a filter has been placed in the water tank.
Therefore you need to activate each new AquaClean filter that you install in the 'Status' menu.
Your machine has to be completely limescale-free before you start using the AquaClean filter.
Replace the AquaClean filter at least every 3 months, even if the machine does not yet indicate
that replacement is required.
Brew group
When you remove the brew group from the machine, make sure to empty the drip tray and the
coffee grounds container.
Before you slide the brew group back into the machine, make sure it is in the correct position.The
arrow on the yellow cylinder on the side of the brew group has to be aligned with the black arrow
and N (Fig. 16).
Milk system/internal
cappuccinatore
Milk container
When to clean
When the machine asks you or
every three months.
Weekly
Monthly
After every day of use
Weekly
Monthly
Weekly
How to find in the control panel/
What to do
STATUS->CLEANING->AQUACLEAN. Follow
the steps to activate the AquaClean filter.
STATUS -> PERFORMANCE ->BREW
GROUP CLEAN. Follow the steps to remove
and clean the brew group.
STATUS -> PERFORMANCE ->COFFEE OIL
REMOVAL. Follow the steps of the self-
cleaning process to automatically remove
coffee oil residues from the brew group.
STATUS -> HYGIESTEAM. Follow the steps
of the self-cleaning process to clean the milk
system. Wipe the outside of the metal milk
tube with a damp cloth before placing it into
the milk tube holder.
Remove and disassemble the internal
cappuccinatore. Rinse all parts under the tap
with some washing-up liquid.
STATUS -> HYGIESTEAM -> DEEP MILK
CLEAN. Follow the steps of the self-cleaning
process to clean the milk system.
Disassemble the milk container (Fig. 20) and
push out the ball using the pin of the milk
tube (Fig. 21). Clean all parts of the milk
container under the tap or in the
dishwasher.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido