Secondary
Filter Screen
Tamis filtrant
Filtro secundario
Suction Inlet
Entrée d'aspiration
Entrada de aspiración
Hose Inlet
Entrée du tuyau
Entrada de
manguera
All manuals and user guides at all-guides.com
Removing Clogs
Connector Pipe
Tube connecteur
Tubo conector
Short Hose
Tuyau court
Manguera corta
A
B
B
A
Hose Coupling
Accouplement
de tuyau
Acoplamiento de
manguera
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bin is full or if a filter is clogged.
➢ ➢ Check the hose area.
➢ ➢ Remove extension hose by grasping
the hose collar, twisting, and pulling
straight off.
➢ ➢ Visually inspect the hose and the
base area into which the hose is
connected.
➢ ➢ Remove any visible clog.
➢ ➢ Re-connect the extension hose to the
connector pipe.
➢ ➢ Plug in the vacuum cleaner and turn it
on.
➢ ➢ Stretch the hose to maximum length
and then allow the hose to return to its
storage length.
➢ ➢ Turn off and unplug the vacuum
cleaner.
➢ ➢ Remove dust bin and check
secondary filter screen for clogs.
➢ ➢ If the dust bin, filter areas and the
hose areas are free of clogs, check
the nozzle area.
➢ ➢ Return the vacuum cleaner to the
upright position before plugging into
an electrical outlet.
- 54 -