Kalorik USK FT 2 Manual Del Usuario página 6

All manuals and user guides at all-guides.com
ASSEMBLING THE DEEP FAT FRYER
Place the main housing on a dry level surface.
•
Replace the bowl until it rests on the three stops located on the
•
inside of the main housing. Ensure that the bowl is centered
correctly and level.
Replace the control panel and the accessories. To replace the
•
control panel, firmly slide the control panel downward into the
location grooves on the back of the main housing. You will hear a
"click" when the control panel is correctly located. NOTE: The
appliance will only operate when the control panel is correctly
fitted.
Place the bowl back in the outer jacket (ensuring the hook for the
•
basket is at the front) and then replace the control panel and
element. To replace the control panel, firmly slide the control
panel downward into the location grooves on the back of the
outer jacket. You will hear a "click" when the control panel is
correctly located. NOTE\: The appliance will only operate when
the control panel is correctly fitted to the outer jacket. Remove
the dustcover, basket and handle and any packaging form the
appliance.
BASKET ASSEMBLY INSTRUCTIONS
To assemble the basket handle ready for frying, lift the basket
•
handle and rotate in the direction of the arrow shown on the
basket hinge. When the handle is in the correct position, you will
hear it "click" into place. Please see fig 1 below.
To unlock the basket handle (for storage etc), gently squeeze the
•
two parallel bars together whilst at the same time gently lifting the
basket handle and rotate the basket handle in the opposite
direction of the arrow shown on the hinge. Please see fig 2 below.
6
USK FT 2 071026