Heating Milk - melitta CAFFEO SOLO&perfect milk Manual De Instrucciones

9

Heating milk

Prerequisite: The appliance must be ready for operation (see „Switching on
and off" on page 56).
You can use the Cappuccinatore to heat milk directly from the milk carton or from a
vessel.
•
Submerse the Cappuccinatore hose directly in the milk.
•
Place a cup under the Cappuccinatore.
•
Press the button for steam dispensing
→ The standby symbol
symbol
Warning!
There is a risk of burn injuries and scalding due hot steam and the hot
steam pipe.
Never reach into the escaping steam.
–
Never touch the steam pipe during use or immediately after use.
–
•
Turn the control dial (Fig. F, No. 3) to the „Warm milk" position.
The „Warm milk" function is active when the
dial points upwards.
•
Turn the valve switch (Fig. A, No. 11) clockwise to the stop to open the
valve.
→ The valve symbol
•
When you have dispensed the desired quantity of warm milk, turn the
valve switch (Fig. A, No. 11) anti-clockwise to the stop to close the
valve.
•
Rinsing the Cappuccinatore: Proceed as described on page 61.
62
is fl ashing. The appliance heats up. Then the valve
illuminates.
fl ashes.
.
symbol on the control