Transport And Disposal; Preparation For Transport, Protection Against Freezing And Measures For Longer Periods Of Non-Use - melitta CAFFEO SOLO&perfect milk Manual De Instrucciones

13

Transport and disposal

13.1 Preparation for transport, protection against freezing
and measures for longer periods of non-use
Venting the appliance
We recommend that you vent the appliance if it will not be used for an extended
period of time and before transport. This also protects the appliance against frost
damage.
Prerequisite: The appliance must be ready for operation (see „Switching on
and off" on page 56).
•
Take the Melitta
•
Simultaneously press the button for coffee dispensing
ON / OFF button
→ The standby symbol
the symbol for the water tank
•
Flip up the lid of the water tank (Fig. A, No. 7) and pull the water tank
up and out of the appliance.
→ The symbol for the valve
•
Place a vessel below the Cappuccinatore.
•
Turn the valve switch clockwise to the stop to open the valve.
→ Water will run out of the Cappuccinatore and into the vessel; steam will also
escape. The valve symbol
Warning!
Danger of scalding by hot steam
Make sure that you do not burn yourself on the hot steam that escapes from
the Cappuccinatore during the venting process.
water fi lter out of the water tank.
® ®
Claris
for more than 2 seconds.
fl ashes during a brief heat-up phase. Subsequently,
will be illuminated.
will be illuminated.
now fl ashes.
and the
81