Speedlink SL-6510 Manual De La Operación

SL-6510 Operation Manual
Introduction:
Thank you for purchasing the Scarab Gamepad. The Scarab Gamepad support
Windows 95/98 USB plug and play - the most advance interface of PC computer.
Before operating thoroughly familiarize yourself with this manual, so that you can
understand the functions completely.
PRODUCT FEATURES
FUNCTIONS: -
a) 8 Fire Buttons and Turbo mode
b) Selectable Turbo Fire Button
c) Support USB Plug and Play
d) 2 Analogue Sticks
e) Coolie Hat-functions
CONNECTION & INSTALLATION
Important:
Install the software before connecting the Scarab Gamepad to your PC
Software Installation:
1. Insert the software diskette into 3.5" floppy drive of your computer
2. Click START then select RUN
3. Type a:setup.exe and press ENTER key
4. Follow on screen instruction to complete the installation.
Hardware Connection:
1. Plug the USB connector to your computers USB port, Windows system may be
prompt you to put Windows 95/98 disk in the computer in case to install a new
device.
2. Click START then select Control Panel, click on GAME CONTROLLER
3. Select Scarab Gamepad
4. Click on PROPERTY then click on CALIBRATE to calibrate and test your
hardware.
Mode Selection:
Autofire mode:
You can activate Autofire button 1-4 at any time during game playing by selecting
the Autofire mode. Function key details see DWG.1.1
Note: When Autofire enabled, Autofire button 1-4 will work as Fire button 1-4
with Autofire capability.
8 Buttons mode:
Simply select the 8 Buttons mode to activate the 8 individual fire buttons and
Analogue sticks function. Function key details see DWG.1.2
Note : There are 8 function buttons and 2 Analogue sticks on the Scarab